Fenders

- Deluxe wide front fender set for 24" (507) wheels - Designed for use with the Rambler A.T. (1.95"-2.25" wide tires) - Robust design for years of reliable use - Set of two, contains mounting hardware and instructions - Flat black fenders with black hardware

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10"x24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

• Protects you from wet and muddy roads and trails • Attaches quickly to seat rails without tools

If you're planning on riding somewhere muddy, Blackburn's Dirt Merchant fender set will keep mud, sticks, and leaves from being shot up at your mouth and eyes and the rooster tail from going up your back. Up front rubber mounting straps secure it to your down tube and rubberized pads protect your frame finish. In the back an angle adjustment lets you fine tune the rear fender for optimal coverage, and a tool-free aluminum clamp attaches this to almost any seatpost. In case the sun goes down while riding home a reflector is ingeniously incorporated for visibility.

Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces

Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included

These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA

These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65

Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender M1/M2 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC1/RC11 fender set. They utilize a unique quick-release mounting system that makes installation a snap and they're made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. The front fender has a clever feature: it automatically disengages if a large object enters the wheel. The underside is highly polished so grime doesn't stick and, they accommodate tires up to 700 x 25c in size.

Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC11 fender. It uses unique quick-release mounting system that makes installation a snap and it's made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. There are pivot points that make it compatible with nearly any size bike or tire. The underside is highly polished so grime doesn't stick and, it accommodates tires up to 700 x 25c in size.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams

The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 192 grams (Front); 245 grams (Rear)

DeFender TX is a compact trekking bike fender. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 245 grams

Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

Sunlite's Clip-On Fender Set fits 26-inch mountain bikes, so whether you ride sloppy trails or commute in any weather, you're covered. They're made from corrosion-proof plastic so they're light and tough, too.